Contact Supplier

Mr. LIU

Leave a message

Contact Now

HRC600 Top Driving Drilling Rig

$180000

≥1
Piece/Pieces

Payment Type:

L/C,T/T,D/P,Paypal,Money Gram,Western Union

Incoterm:

FOB,CFR,CIF,EXW,FCA,CPT,CIP

Min. Order:

10 Set/Sets

Transportation:

Ocean,Land,Air

Port:

Qingdao,,

Contact Now

Product Description

Product Attributes
Supply Ability & Additional Information
Packaging & Delivery

< >

Overview

Product Attributes

Model No.: HRC600

Marketing Type: New Product 2020

Core Components: Motor

Drilling Diameter: 450mm

Drilling Depth: Max.130m

Number Of Cylinders / Capacity: 6/9.726l

Mast Height(fully Extended): 18.9m

Mast Length(fully Retracted): 12m

Stroke Of Feeding: 14m

Stroke Of Mast Slipping: 3.65m

Applicable Industries: Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Construction Works

Local Service Location: None

Showroom Location: None

Condition: New

Power Type: Diesel

Place Of Origin: Shandong, China

Usage: Ore

Voltage: 380v/220v

Warranty: Unavailable

Machinery Test Report: Provided

Video Outgoing-inspection: Provided

Warranty Of Core Components: Not Available

Key Selling Points: Competitive Price

Product Name: Drilling Machine

Moving Speed: 3 Km/Hour

Fuel Tank Capacity: 6800liters

Cooling System: Water Cooling

Drill Rod: 18-45 Feet

Supply Ability & Additional Information

Packaging: steel box

Transportation: Ocean,Land,Air

Place of Origin: CHINA

Supply Ability: 10 Piece/Pieces per Month

Certificate: ISO9001 ，CE

Port: Qingdao,,

Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union

Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP

Packaging & Delivery

Selling Units:: Set/Sets

Package Type:: steel box

HRC600 WATER Well Drilling Rig(Multifunction)

HRC600 is mainly used for coal bed methane exploration,water well drilling,rescue well drilling,shallow oil and gas,mine exporation drilling. 1.Rotary-drilling with direct circulation 2.Rotary-drill with reverse circulation 3.Percussion Core Drilling(ram coring) 4.Wire line core drilling 5.RC drilling an Hammer drilling HRC600 is mounted on the undercarriage of excavator with total wight of 35 ton.The engine power 243 Kw. Mast Constructed of high tensile steel and hydraulically elevated,mast lifting and lowering and degree of slope controlled by four double acting hydraulic cylinders.The mast is equipped with 4 guide rails for the carrier of the drill head and a suspension for the feed device.The rig is also equipped with slipper system,in order to mast slip,and the stroke is 3.65m,the mast can be reliably based on the ground.The rig can be set up the blowout preventer and other systems. Mud line system All mud lines on the HRC 600 Drilling rig have 76.2mm diameter,in order to reduce friction losses to a minimum. Top Drive head Top drive head suits for tricone bit,DTH hammer,PDC Drill Bit and diamond bit which meets special demand of rotate speed and torque during work.The 4-shift Gear bos using spur gear drive,oil bath lubrication.Hydraulic Motor and gear bos could provide for much high speed and torque to be adjusted. The angle of rotate unit could be adjusted as needed,ranges from 0-90 (vertical-horizontal). The water connector and hold a pressure maximum 35 Mpa. Electrical System Generator and battery are driven by diesel engine and provide 24v direct-current power supply.All cables are protected with seal line. Further more,all circuits are equipped with short-circuited plunger. Other HRC600 Rig can be modified.All kinds of aggregates,required for different drilling methods,can be installed on the rig at customer request,or supplied as stand-by aggregates. Technical Parameters

Track
Moving Speed	3 km/hour
Diesel Engine
Model	STEYR-WEICHAI Diesel engin,2 valves turbocharged intercooled
Power	330 HP
Cooling System	Water cooling
Number of Cylinders / capacity	6/9.726L
Fuel Tank Capacity	6800Liters
Drilling capabilities-4 shifts,8 Speeds
1-Shift	270-600 RPM 3850-2150 Nm
2-Shift	150-280 RPM 3850-6850 Nm
3-Shift	95-170 RPM 6250-11000 Nm
4-Shift	60-110 RPM 9000-16800 Nm
Angel of drilling head	0-90(Vertical-Horizontall)
Main Winch
Line Pull	30KN
Wire Rope diameter	14 MM
Air compreesor	15 M
Mast Specifications:
Mast Height(fully extended)	18.9m
Mast length(fully retracted)	12m
Stroke of Feeding	14m
Stroke of Mast Slipping	3.65m
Drill Rod	18-45 feet
Coring Winch
Line Pull	15 kN
Pull speed	0-280 m/min
Power tong
Size Rang	3 1/2' coupling-8 'body
Max.Torque	100 KNm
Rotation speed	2.7-40 RPM
Top Crane Hoist Capacity
Maximum Hoist Capacity	20kN
Steel Wire Rope Diameter	8 mm
Steel Wire Rope Length	45 m
Untwisting System Specifications
Applicable Drill Rod	2 inch to 5 inch Diameter
Maximum Torque	40000 Nm
Unit Dimensions & weight
Dimensions (Operating)	12100x 2 900 x 3400mm
Dimension (Mobilization)	8160 x 2 900 x 18900mm
Weight(Crawler type)	33000 kg

JINAN ALLIANZ MACHINERY CO.,LTD is located Jinan City,Shandong province,is a collection of core drilling rig ,Water Well Drilling Machine and Compost Turner design, manufacture and installation of an integrated enterprise.The company was founded in 2012, the head office in China, branch offices and service center are located in Moscow, Vladivostok(Russia),Almaty( Kazakhstan), Bishkek (Kyrgyzstan). Company has its own R & D team, can undertake OEM design, modification service.We are served our clients from over 12 countries with more than 26 mining projects.With our professional and customized drilling solutions, durable and reliable machinery performance, 24/7 stand-by service and technical support, we have earned our reputation worldwide. We send our warmest welcome to all our business partners around the world to come and visit us at any time of convenience.